G+_Rud Dog Posted September 17, 2018 Share Posted September 17, 2018 Continuing Cord cutting experiences and questions. The latest info gathering for my setup has to lead me to attempt to find out what kind of cable to use when teeing two HDHR with cable? These will be very short so don't know if it matters. Also same question but applied to the amplifiers build like small Tees. Think they are referred as passive? Link to comment Share on other sites More sharing options...
G+_Ben Reese Posted September 17, 2018 Share Posted September 17, 2018 RG6 or RG59? Crimped F-connector ends are better than screw on. Tees reduce your signal, but you can probably find an amplifier with 2 outputs. I'd try just the Tee first and see if it reduces signal too much. Link to comment Share on other sites More sharing options...
G+_Rud Dog Posted September 17, 2018 Author Share Posted September 17, 2018 Ben Reese I have some tee-amplifiers but not sure what impedance matching I need. Will take one out and see what it says on the tee-amp. Not sure what is being used for antennas nowadays. Link to comment Share on other sites More sharing options...
Recommended Posts